Now a day’s automotive industry, high strength steels require a lot of energy to weld without overheated. The Shellmax inverter spot welder simply works with steels and features with double action capability allow the user to move promptly and without difficulty between welding positions for superior productivity.
The completely featured spot welder is air-cooled with two fans and overheats warning for protection.
The S12-3 Inverter Spot Welder will handle up to a highest of 12,000 amps, with inverter frequency of up to 2,000 Hz. The welding gun is versatile using stainless steel and will allow the user do single-sided and double-sided spot welding.
The smart control panel has operating modes to hold up to 40 welding programs. Inverter spot has memory function to grasp user set operating mode and programs will recall later.
The S12-3 easily welds steel, zinc-coated steel, galvanised steel used in motor vehicles. S12-3 Inverter Spot Welder is automatic adhesive detection and adjustment, plus energy control for heat wounded, by maintenance flat energy levels according to thickness and quality of sheets being welded. The S12-3 has arm to follows the operator wherever the spot gun is positioned for welding.
Thursday, April 22, 2010
Spot Welder Electro Mechanical Characteristics
Welding by spot welder is an electro mechanical development in which combining only applicable metal are joined together by the heat accessible from opposing capacity to electric current flow. Metal on work is being done are detained mutually under complete control pressure of exerted electrodes.
Characteristically the metal sheets are in the 0.5-3.0 mm thickness capacity. The welding work progression uses two shaped copper alloy electrodes to deliberate welding power into a tiny SPOT and to at the same time hold tightly the sheets together.
After applying certain amount of force of bulky current through the spot will melt the metal and form the weld. The nice-looking characteristic of welding through inverter spot welder is a lot of force can be delivered to the spot in a very short time. That permits the welding to take place without extreme heating to the remaining of the metal used.
The amount of heat applied to the spot is dogged by the confrontation between the electrodes and the amplitude and duration of the supplied power. To be appropriate too little energy will not be melting the metal or will build a low quality weld.
If a welder is applying more amount of energy then because certain properties of metal it will melt more, eject molten material, and generate a hole instead of a weld. An additional striking feature of spot welding is the energy transported to the spot can be completely in command to create dependable welds.
Spot welding is characteristically consumed when welding only meticulous types of sheet metal. Substantial stock is more complicated to spot weld, the reason is for it, is the heat streams into the nearby metal more straightforwardly.
Certain unique characteristic metal alloys can be spot welded, but their large amount of thermal conductivity as well as electrical conductivity requires elevated welding powers. This requires better, extra influential and additional exclusive welding machine capacity.
Inverter Spot Welder, Spot Welder
Characteristically the metal sheets are in the 0.5-3.0 mm thickness capacity. The welding work progression uses two shaped copper alloy electrodes to deliberate welding power into a tiny SPOT and to at the same time hold tightly the sheets together.
After applying certain amount of force of bulky current through the spot will melt the metal and form the weld. The nice-looking characteristic of welding through inverter spot welder is a lot of force can be delivered to the spot in a very short time. That permits the welding to take place without extreme heating to the remaining of the metal used.
The amount of heat applied to the spot is dogged by the confrontation between the electrodes and the amplitude and duration of the supplied power. To be appropriate too little energy will not be melting the metal or will build a low quality weld.
If a welder is applying more amount of energy then because certain properties of metal it will melt more, eject molten material, and generate a hole instead of a weld. An additional striking feature of spot welding is the energy transported to the spot can be completely in command to create dependable welds.
Spot welding is characteristically consumed when welding only meticulous types of sheet metal. Substantial stock is more complicated to spot weld, the reason is for it, is the heat streams into the nearby metal more straightforwardly.
Certain unique characteristic metal alloys can be spot welded, but their large amount of thermal conductivity as well as electrical conductivity requires elevated welding powers. This requires better, extra influential and additional exclusive welding machine capacity.
Inverter Spot Welder, Spot Welder
Subscribe to:
Posts (Atom)